R-EL642/PLUS | Sound Module

Brand: Golmar
Product Code: GO19917642

For Nexa entry panel or coded entry panels (without pushbuttons).
4-wire "Plus" digital installation.
Audio unit with independent door frame and adjustable volume.
Removable terminal for easy wiring.
Privacy regarding sound and door is protected.
Electronic call with acoustic identification signal, confirming that the call is in progress, the system is busy or the lock is activated.
Connection to pushbutton units or keypad using short flat cables supplied with the units.
Selectable lock activation time.
Includes two pushbuttons.

The materials for digital doorphone and video doorphone systems with PLUS technology can operate in a mixed system with monitors and doorphones, as well as accept multiple door panels without a splitter.

Door panel with call buttons:

Accepts up to 132 calls.
In a single-building system, we use one EL642/PLUS mechanism (for a doorphone system) or one EL632/PLUS (for a video doorphone system) in each door panel. In systems with more than 2 buttons, we use as many 10-button EL610D mechanisms as we need to call all the apartments. In door panels with more than one column of mechanisms, we use the RAP-610D cable to connect the columns together.

Coded panel:

Accepts up to 255,000 calls from a total of 255 buildings with keypad panels (1,000 apartments per building). In the event that even 1 panel from the set is not with a keypad but with call buttons, the number of total buildings is reduced to 127, and the number of calls per building depends on the corresponding panel.
We use an EL642/PLUS mechanism (for a doorphone system) or an EL632/PLUS (for a video doorphone system) on each panel.
We use the N3301/AL or NX3301/AL keypad, while the navigation mechanism, N3403/AL or NX3403/AL is optional. When the navigation mechanism is present, we can also add regular call buttons for specific apartments or for doorman devices.
The instructions and codes of the apartments are displayed on the LCD screen, however, you can add the N3002/AL or NX3002 mechanism to put written instructions for the correct use of the mechanism by the visitor.

In the case of the wiring in a star configuration, we use the SU3-PLUS splitter to reduce the number and measures of the wiring required to connect the doorbells in series.

This system accepts monitors and doorphones with ‘PLUS’ or ‘UNO’ technology. In the case of the wiring with UTP, the EL562 video encoder must be added to each monitor with the sole exception of the SZENA PLUS SE monitor. The maximum number of parallel devices in the same apartment is 3, without the use of an additional power supply.

In case you have ‘UNO’ devices the system can accept 200 calls and the total wiring length should not exceed 200 meters (from the door panel to the most remote device). To increase the distance or the number of apartments, the RD-PLUS/UNO SE mechanism should be used. In group systems we use one RD-PLUS/UNO SE mechanism for each door panel that has ‘UNO’ devices connected to it.

We use 1 FA-PLUS/C power supply in systems with up to 20 devices or 1 FA-PLUS/C power supply for each group of 50 devices. We also use 1 FA-PLUS/C power supply for each secondary door panel. Finally, 1 more will be needed which will amplify the signal in the system splitters (1 power supply for all splitters)

We use 12Vdc jumper. We can connect AC power if we use the TF-104 transformer.